Lifting Magnets Accessories
We Provide the required power supply for each of our magnets,designed to suit the magnet
and your own mains supply.Sets of backup batteries & battery charger to protect against
power failures that could cause the load to fall(optional). We also provide Spring /
Sprocket driven cable reeling drum .(optional)
TRANSFORMER RECTIFIER CONTROL PANEL
- MCCB rated 10kA
- HRC fuses for incoming supply, secondary side,D.C. side and in control circuit.
- 3 phase indicating lamps.
- Air cooled Transformer suitable for 415V, 3 phase, 50 Hz AC
input with suitable tappings on the primary side and secondary
side for 220VDC output.
- Silicon diode bridge rectifier with surge suppressor network.
- "ELEKTROMAG" Contactors for lift and drop.
- Wire Wound Resistance box with discharge resistors and counter
excitation resistor.
- Master controller or push button station (indicate your choice
in your order) with lift, inch/off and drop modes.
- Duty Cycle Timer/Controller to monitor the 'ON-TIME' of the
Lifting Magnet.
- DC Ammeter (with Current Sensing Relay).
- DC Voltmeter.
|