SUSPENSION / OVERBAND MAGNETIC SEPARATOR
In many branches of industry ELEKTROMAG Overband Magnetic
Separators and Suspension Magnets have become indispensable
for decades. They are used for removing magnetic parts from
non-magnetic materials in order to protect crusher, mills,
processing plants etc. against too much wear and damage.
They serve for cleaning non-magnetic bulk goods with iron
contamination, for instance cleaning of foundry sand, coal
and the like. They are used for recovering magnetic material
from ore, steel mill slag etc.
Generally, Overband Magnetic Separators and Suspension
Magnets are installed above conveyor belts, vibratory
feeders or chutes. They pick up ferrous metal parts from the
bulk goods. In most cases, the magnet can also be installed
in an existing installation without much expense.
SUSPENSION / OVERBAND MAGNETIC SEPARATORS PERMANENT
ELEKTROMAG Suspension Magnets are used when only small contamination levels are encountered. The material accumulated on the pole face must be removed at regular intervals. When stopping the plant and in case of power failure, the iron drops back into the material to be conveyed.
ELEKTROMAG Overband Magnetic Separators are used when substantial quantities of magnetic material and or long bulky pieces are contained in the conveyor burden. This material is attracted by the magnet and is transported out of the magnetic field and ejected by the discharge belt running around the magnet.
SUSPENSION / OVERBAND MAGNETIC SEPARATORS –ELECTROMAGNETIC
Electromagnetic Suspension/Overband Magnets are used for heavy duty applications which may be beyond the reach of Permanent Suspension/Overband Magnets. They are used typically in applications such as Raw Material handling of Coal, Iron Ore, Limestone , Sugar cane etc. in Thermal Power Plants, Steel Plants , Ports, Sugar Mills etc. They are used for removing magnetic parts from non-magnetic materials in order to protect crusher, mills, processing plants etc. against too much wear and damage. They serve for cleaning non-magnetic bulk goods with iron contamination, for instance cleaning of foundry sand, coal and the like. They are used for recovering magnetic material from ore, steel mill slag etc. Magnets can be installed for Belt widths ranging up to 2500 mm. width and Operating heights upto 1100 mm. The Electromagnet coil may be Natural Air Cooled or Oil Cooled depending on customer's preference.
|